Как замерить кухонные шкафы под ремонт

Ремонт кухни, самый замероёмкий домашний проект. Дизайнеру нужно 30+ конкретных размеров до создания планировки. Снимите всё за один 15-минутный обход, сэкономит несколько визитов и ускорит дизайн.

Зачем замерять

• Provide complete data for a designer's first proposal
• Avoid mid-project surprises about plumbing or electrical
• Compare quotes from multiple kitchen suppliers like-for-like
• Document existing conditions for permit applications

Что нужно

• iPhone with Ruler AR (LiDAR strongly preferred, speeds the process 2x)
• Room Scan and individual Length measurements
• Photo + Annotation in each captured project

Пошагово

1. Floor plan (full kitchen scan). Open Room Scan. Walk the kitchen perimeter. The app captures walls, doorways, windows. This is your baseline document.
2. Ceiling height (at three points). Center of kitchen, near the back wall, near the front. Ceilings sag or angle slightly in older homes, capture variations.
3. Wall lengths between corners. For each wall run, measure from inside corner to inside corner. Critical for cabinet ordering, even 2 cm off changes which size cabinet fits.
4. Window and door positions. For each: width, height, distance from corner of wall (left and right), height of sill from floor. Affects upper cabinet height limits.
5. Appliance positions and dimensions. For each: width × depth × height, distance from corner of wall, height from floor. Mark which can be moved vs. fixed.
6. Plumbing and electrical. Sink: drain position relative to wall corner and floor. Dishwasher: water supply line position. Stove: gas line + electrical outlet position. Each one constrains the new layout.
7. Existing cabinet dimensions. If keeping some cabinets: their dimensions (width × depth × height), door swing direction, drawer slide type. Important for partial renovations.
8. Counter heights and depths. Standard counters: 91 cm height × 64 cm depth. Variations matter, check yours. Note any backsplash height.

Советы

• Take a photo at each measurement step, designers prefer "annotated photos" over "dimensions list" for clarity
• Note natural light direction, affects which side gets glass-front cabinets
• If existing cabinets are mid-century or older, dimensions may differ from modern standards by 5-10 cm

Типичные ошибки

• Skipping the appliance dimensions ("they'll measure", but designers need them for layout)
• Not noting the plumbing position, kitchen designers can't move it
• Forgetting the height variations, older homes have non-standard countertops

Частые вопросы